Digiplex EVO641R Instrukcja Instalacji Pobierz pdf (Strona 49)

Modules Programming Guide - 49

Power Supply Module (DGP2-PS17)

Door Contact Module (DGP2-ZC1)

Caution:

Disconnect

battery before

replacing the

fuse.

For information on the

Power Supply Module’s

LEDs, refer to Module

LED Indications on

page 39.

Control Panel

(EVO48 & EVO192)

The 12Vdc power supply output will automatically shut down if the current exceeds 1.1A.

A 40VA transformer is required when selecting the 850mA battery charge current. Using a 20VA transformer

with a battery charge current of 850mA may damage the system.

Refer to Module Connection Drawings on page 39 for information on how to connect the Power Supply

Module’s PGM output (Figure 2). Before commencing with the connections, please read the General Warnings

listed on page 40.

Improper connection of the transformer

may result in damage to the system.

For information on the

Addressable Door Contact’s

LEDs, refer to Module LED

Indications on page 39.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 59 60

Brak uwag

Digiplex EVO641R Instrukcja Instalacji Strona 49