Digiplex EVO641R Instrukcja Instalacji Pobierz pdf (Strona 41)

Modules Programming Guide - 41

EVO641/EVO641R Access Control Connections

LCD Keypad Module (EVO641/EVO641R) 48-Zone LED Keypad Module (DGP2-648)

Memory Key

Connector

To Digiplex

control panel

EVO48 or

EVO192

Please Note: The keypad’s

anti-tamper switch will

communicate its status to

the control panel via the

combus.

* The keypad’s zone

follows the control

panel’s EOL definition.

The zone speed is set at

600mS and cannot be

programmed.

Door Contact

Combus

To Digiplex

control panel

EVO48 or

EVO192

Please Note: The keypad’s

anti-tamper switch will

communicate its status to

the control panel via the

combus.

* The keypad’s zone

follows the control

panel’s EOL definition.

The zone speed is set at

600mS and cannot be

programmed.

Door Contact

Combus

EVO641R

Fused external power

supply (recommended)

Door Lock

IN4007

Diode

EVO641R

Paradoor (460)

Request to Exit device.

Must be connected to

terminal.

If a door contact is not being used, install a jumper

or a 1k

resistor across the BLK and Z1 terminals

depending on the control panel’s EOL definition.

If the REX (Request for Exit) device is not being

used, place a jumper across the BLK and Z2

terminals.

Door Contact

Must be connected

Z1 terminal.

* Follows control panel’s EOL definition.

No EOL

required for

Z2.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

Digiplex EVO641R Instrukcja Instalacji Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digiplex EVO641R