Digiplex EVO641R Instrukcja Instalacji Pobierz pdf (Strona 58)

Digiplex -EVO- - 58 - Programming Guide

Table 2: Message Programming Special Function Keys

Table 3: Alphanumeric Keys

Table 4: Special Characters

Message Programming

Each section from [101] to [148], [200] to [204] and [301] to [396] contains one message with a maximum of 16 characters. The sections contain the

following messages:

Sections [101] to [148] = “Zone 01” to “Zone 48” respectively

Section [200] = “Paradox Security”

Sections [201] to [204] = “First Area”, “Second Area”, “Third Area”, and “Fourth Area”

Sections [301] to [396] = “Code 01” to “Code 96” respectively

After entering the section corresponding to the desired message, the message can be re-programmed to suit your installation needs as detailed in

Table 2. For example, section [101] “Zone 01” can be changed to “FRONT DOOR”.

Key Function Details

[

STAY] Insert Space Press the [STAY] key to insert a blank space at the current cursor’s position.

[

FORCE] Delete Press the [FORCE] key to delete the character or blank space found at the current cursor’s position.

[

ARM] Delete Until the End Press the [ARM] key to delete all characters and spaces to the right of the cursor and at the cursor’s position.

[

DISARM] Numeric/Alphanumeric Press the [DISARM] key to toggle the numeric keys to alphanumeric keys and vice versa. Numeric: Keys [0] to [9]

represent numbers 0 to 9. Alphanumeric: refer to Table 3 below.

[

BYP] Lower/Upper Case Press the [BYP] key to toggle from lower to upper case and vice versa.

[

MEM] Special Characters After pressing the [MEM] key, the cursor will turn into a flashing black square. Using Table 4 below, enter the 3-digit

number for the desired character.

Key Press Key Once Press Key Twice Press Key Three Times

[1]ABC

[2] D E F

[3] G H I

[4] J K L

[5] M N O

[6] P Q R

[7] S T U

[8] V W X

[9] Y Z

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

Brak uwag

Digiplex EVO641R Instrukcja Instalacji Strona 58