Digiplex DGP-641 Instrukcja Instalacji Pobierz pdf (Strona 64)

60 Reference & Installation Manual

19 Warnings

FCC Warnings

Important Information

This equipment complies with Part 68 of the FCC rules subpart D and CS-

03. Inside the cover of this equipment is a label that contains, among other

information, the FCC registration number of this equipment.

Notification To Telephone Company

Upon request, customer shall notify telephone company of particular line to

which the connection will be made and provide the FCC registration

number and the ringer equivalence of the protective circuit.

FCC REGISTRATION NUMBER: 5A7CAN-22633 - AL - E

RINGER EQUIVALENCE NUMBER: 0.1B (U.S. & CANADA)

USOC JACK: RJ31X (USA), CA31A

(CANADA)

Telephone Connection Requirements

Except for telephone company provided ringers, all connections to the

telephone network shall be made through standard plugs and telephone

company provided jacks, or equivalent, in such a manner as to allow for

easy, immediate disconnection of terminal equipment. Standard jacks shall

be so arranged that, if plug connected thereto is withdrawn, no interference

to operation of equipment at customer's premises which remains connected

to telephone network shall occur by reason of such withdrawal.

Incidence Of Harm

Should terminal equipment/protective circuitry cause harm to telephone

network, telephone company shall, where practicable, notify customer that

temporary disconnection of service may be required; however, where prior

notice is not practicable, the telephone company may temporarily

discontinue service if action is deemed reasonable in circumstances. In

case of temporary discontinuance, telephone company shall promptly notify

customer and will be given opportunity to correct the situation.

Changes In Telephone Company Equipment Or Facilities

The telephone company may make changes in its communication facilities,

equipment operations or procedures, where such actions are reasonably

required and proper in its business. Should any such changes render

customer's terminal equipment incompatible with the telephone company

facilities, the customer shall be given adequate notice to effect the

modifications to maintain uninterrupted service.

General

This equipment shall not be used on coin telephone lines. Connection to

party line service is subject to state tariffs.

Ringer Equivalence Number (REN)

The

REN is useful to determine the quantity of devices that you may connect

to your telephone line and still have all of those devices ring when your

telephone number is called. In most, but not all areas, sum of the

REN's of

all devices connected to one line should not exceed five (5). To be certain of

the number of devices that you may connect to your line, you may want to

contact your local telephone company.

Equipment Maintenance Facility

If you experience trouble with this telephone equipment, please contact

facility indicated below for information on obtaining service or repairs. The

telephone company may ask that you disconnect this equipment from

network until problem is corrected or until you are sure that the equipment

is not malfunctioning.

FCC Part 15, Warnings: Information To User

This equipment has been tested and found to comply with the limits for

Class B digital devices, pursuant to Part 15 of FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy, and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

equipment intermittently, the user is encouraged to try to correct the

interference by one or more of the following measures: (1) reorient or

relocate the receiving antenna; (2) increase the separation between the

equipment and receiver; (3) connect the equipment to an outlet on a circuit

other than the one to which the receiver is connected, or (4) consult the

dealer or an experienced radio/tv technician for assistance.

Caution:

Changes or modifications not expressly approved by PARADOX

SECURITY SYSTEMS could void the user's authority to operate the

equipment.

CTR-21 Warnings

The equipment has been approved in accordance with Council Decision 98/

482/EC for pan-European single terminal connection to the public switched

telephone network (PSTN). However, due to differences between the

individual PSTNs provided in different countries, the approval does not, of

itself, give an unconditional assurance of successful operation on every

PSTN network termination point. In the event of problems, you should

contact your equipment supplier in the first instance.

General Warning

This equipment must be installed and maintained by qualified service

personnel only.

UL and C-UL Warnings

UL AND C-UL INSTALLATION NOTES

This equipment is UL listed in accordance with standard UL1023

(Household Burglar -- Alarm Systems Units), standard UL985 (Household

Fire Warning Units) and standard CAN/C-UL S545 (Residential Fire

Warning System Control Units). This equipment has the capability of being

programmed with features not verified for use in UL installations. To stay

within these standards, the installer should use the following guidelines

when configuring the system:

• All components of the system should be UL listed for the intended

application.

• If the system will be used for “Fire” detection, the installer should refer

to NFPA Standards #72, Chapter 2. In addition, once installation is

complete, the local fire authority must be notified of the installation.

• This equipment must be verified by a qualified technician once every

three years.

• All keypads must use a tamper switch.

• Maximum allowed entry delay is 45 seconds.

• Maximum allowed exit delay is 60 seconds.

• Minimum 4 minutes for bell cut-off time.

• The following features do not comply with UL requirements: Bypass

Recall, Shabbat, Auto Trouble Shutdown, and “No AC Fail” display.

• Do not connect the primary indicating device to a relay. The installer

must use the bell output.

• The metallic enclosure that houses the Digiplex control panel must be

grounded to the cold water pipe.

• Use a UL/C-UL listed Siren: Wheelock model# 46T-12.

• Use a UL/C-UL listed 12Vdc 7Ah rechargeable battery: YUASA

model# NP7-12.

• Transformer requirements: UL listed transformer - 16VAC 40VA

UL listed universal transformer model

#:UB1640W

• The AUX, PGM and Keypad’s maximum current cannot exceed

200mA for UL installations.

All outputs are Class 2 or power-limited, except for the battery terminal.The

Class 2 and power-limited fire alarm circuits shall be installed using CL3,

1 2 ... 59 60 61 62 63 64 65 66 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

Digiplex DGP-641 Instrukcja Instalacji Strona 64

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digiplex DGP-641