Digiplex DGP-641 Dokumentacja Pobierz pdf (Strona 17)

16 Installer’s Guide

5.5 PGM TIMER

Section 007

If the keypad's on-board PGM is in PGM Timed Mode, the value

programmed in section [007] represents how long the PGM will

remain in its opposite state (see section 5.1 of this manual) after being

activated. To program the timer, enter a 3-digit decimal value (000 to

255) in section [007]. The 3-digit value will be multiplied by the PGM

Base Time of 1 second or 1 minute (see section 5.6 of this manual).

5.6 PGM BASE TIME

Section 005: Option [3]

If the keypad's on-board PGM is set in PGM Timed Mode (see

section 5.4 of this manual) you must define whether the value

programmed in section [007] is in minutes or seconds.

Option [3] OFF = PGM Base Time is 1 second (default)

Option [3] ON = PGM Base Time is 1 minute

5.7 PGM OVERRIDE

Section 005: Option [4]

When PGM Override is enabled, the keypad's on-board PGM will

ignore PGM Activation Events, PGM Deactivation Events, and PGM

Timers. It will remain in its normal state (see section 5.1 of this

manual) until the PGM Override is disabled. This option may be used

to test the PGM connections.

Option [4] OFF = PGM Override disabled (default)

Option [4] ON = PGM Override enabled

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Brak uwag

Digiplex DGP-641 Dokumentacja Strona 17