Digiplex DGP-641 Instrukcja Użytkownika Pobierz pdf (Strona 21)

Digiplex Access Control 19

3.2.3 “Door Forced Open” Alarm

If an Access Control Door is opened without an Access Control

Card, a User Access Code, or receiving a “Request for Exit” from

the motion detector, an alarm can be generated. When this alarm

is audible, it will emit a rapid beep.

When the door is closed during the alarm, the “Door Forced

Restore” event can be logged in the Event Record Display (see

Event Record Display in the Digiplex LCD Keypad User’s

Manual). The “Door Forced Open” Alarm can also generate a

Burglar Alarm, which can be reported to the Security Company.

3.3 ARMING AND DISARMING

3.3.4 Arming with Card

An Access Control Card can be programmed to arm area(s)

assigned to the door when a it is presented to the reader twice

within approximately 5 seconds without opening the door.

The Access Control card must be:

• presented during its assigned Schedule

• presented within its assigned Access Level

• programmed to allow arming (see section 2.1.2, p. 9)

• assigned to all areas that are assigned to the Access Control

door. For example, if the door is assigned to areas 1 and 4,

an Access Control card assigned to area 4 will not work.

ACCKEU00.fm Page 19 Wednesday, November 24, 1999 11:05 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 40 41

Brak uwag

Digiplex DGP-641 Instrukcja Użytkownika Strona 21